Quick Answer: Do Fiberglass Pools Need To Be Resurfaced?

Can you change the color of a fiberglass pool?

If you have an old fiberglass swimming pool you can resurface it with this fiberglass gel.

You can resurface newer pools as well to change the color or for added protection.

Hiring someone to do the work will cost a lot of money but you can do it yourself..

Can you power wash a fiberglass pool?

Only pools constructed of plaster, exposed aggregate or concrete are strong enough to withstand the power of a pressure washer. Any other type of pool, such as vinyl or fiberglass, must be cleaned using chemical treatments or using non-abrasive methods.

How do I get rid of a fiberglass pool?

Fiberglass Pool Removal Step by Step ProcessAcquire the necessary permits from the local municipality governing the area where the pool is to be removed.Break and remove the bottom of the pool and disposed of properly with the local recycling program.Removal of Pumps, Heaters, Filters, UV lights etc.More items…•

How long do Fiberglass pools last?

25 yearsA fiberglass pool is expected to last up to more than 25 years – the reason they are the most low-cost option in the long run. Their surface does not support algae growth and resists stain, which means maintenance cost and hassle is significantly minimized.

Can fiberglass pools crack?

Fiberglass pools can craze, or check crack from imprecise manufacturing, or when the surface is not fully supported, like under the steps, or areas where the backfill is eroded. Gel coat can also crack during transport and installation, if it gets bumped around too much.

Can I drain my inground fiberglass pool?

Avoid draining your fiberglass pool if at all possible. You do not need to drain your fiberglass pool for dirty water, a new home, or a foreclosed or abandoned home. If you do need to drain it, hire a professional. Make sure to check the groundwater, brace the pool, and have a sump pipe and gravel backfill.

How deep can fiberglass pools be?

Most fiberglass pools tend to be 3 ½’ to 5 ½’ deep on pools that are 27′ long and smaller. On pools that are 27′ to 35′ long the depths range from 3 ½’ to 6 ½’. On pools that are 35′ to 44′ long the depths can go anywhere from 3 ½’ to 8 ½’ deep.

How often do you have to resurface a fiberglass pool?

Resurfacing/refinishing every 10–15 years. Professional cleaning service each season (for most people)

How much does it cost to resurface a 10 000 gallon pool?

Typical costs: Re-plastering the interior surface of an average residential in-ground pool (10,000-20,000 gallons or 14’x28′ to 16’x32′ and 3.5′-5′ deep) with standard white plaster or marble-dust plaster (marcite) typically costs $2,500-$5,500, depending on the size, depth and shape of the pool, and local rates.

What is the downside of fiberglass pools?

Fiberglass Pools: The Cons The cons associated with fiberglass pools are primarily related to cost and installation issues. … Poor Installation — Because fiberglass pools are delivered as a pre-manufactured shell, it’s important that your contractor follows proper procedure when installing the pool.

Is a fiberglass pool worth the money?

Fiberglass and concrete tend to cost about the same initially. … That said, in terms of total cost of ownership, it’s worth noting that maintaining a fiberglass pool is generally cheaper. That’s because fiberglass is more algae resistant, and therefore could save you money on chemicals over the life of the pool.

Can fiberglass pools be salt water?

Fiberglass swimming pools are very compatible with salt water systems. … Salt water is abrasive on the interior surfaces of concrete/ gunite pools, especially those that have plaster within them. Many families report that they enjoy swimming within a pool that has a salt water system.

How do you know if your pool needs resurfacing?

Top 10 Signs You Have To Refinish Your PoolPlaster Flaking or Peeling. Maybe you’ve noticed the plaster is peeling along the steps or floor of your pool or spa. … Surface Stains. … Roughness. … Check Cracks. … Plaster Discolorations. … Structural Cracks. … Rust Stains. … Loss of Pebbles.More items…•

Can you leave a Fibreglass pool empty?

Regardless of what type of pool you own, the chances of it incurring some sort of damage once it is emptied of water is likely. … Fibreglass – just like a fibreglass boat, fibreglass pools ‘float’ easily when emptied of water, which often requires them to be braced before being emptied.

How much does it cost to resurface a pool with fiberglass?

Average Cost to Resurface a Pool Gunite and fiberglass can average up to $6,500, including labor. Depending on what you currently have, resurfacing may require completely replacing the pool surface and base. This costs between $35,000 and $65,000 and is essentially the same as the cost of building a new pool.

What are the pros and cons of fiberglass pools?

PROS AND CONS OF FIBERGLASS POOLSPRO #1: EASY TO MAINTAIN. … PRO #2: INSTALLATION FLEXIBILITY. … PRO #3: CUSTOMIZATION. … PRO #4: ENDURANCE AND LONGEVITY. … PRO #5: ENVIRONMENTAL AND COST FRIENDLY. … CON #1: SIZE AND SHAPE LIMITATIONS. … CON #2: INSTALLATION EXPERTISE.

Which pool is better fiberglass or concrete?

Fiberglass pools require less maintenance and are easier to keep clean. The smooth surface of the fiberglass makes it easier to control algae and bacteria that may otherwise get caught on the rougher surfaces of a concrete pool. Fewer chemicals are needed in the water to control the bacteria.

Is a fiberglass pool better than a liner pool?

A fiberglass pool will save you money on electricity as compared to a vinyl liner pool. It does need as much cleaning, so the pumps 6 only run for 4 to 6 hours a day, less than the recommended time for a vinyl liner pool. This can make a big difference in annual maintenance costs.