# Quick Answer: What Is Commercial Voltage?

## How much voltage does industry use?

Most household plugs are designed for 120 volts.

In commercial and industrial applications, several different voltages are used, including 208, 240, 480 and 600 volts.

The voltage required for a particular application will also vary according to the power requirements of the building or installation..

## Is 240v single or 3 phase?

240V power is used in the US and parts of the world. In the US 120 / 240V 1 Phase 3 Wire is the standard for homes and 240V 3 Phase Open Delta is the standard for small buildings with large loads. In parts of the world 240V Single Phase 2 Wire is the standard for homes.

## What dc voltage can kill you?

Most people have probably experienced this. If you have a unlimited current sourcing DC source of 1800 volts it will likely kill you, 60 volts being considered to be the lower threshold of lethality for current capable sources of more than a few milliamps.

## What are the 3 types of power supply?

There are three subsets of regulated power supplies: linear, switched, and battery-based. Of the three basic regulated power supply designs, linear is the least complicated system, but switched and battery power have their advantages.

## What is acceptable voltage range?

The power company tells me: “ANSI standards states that the nominal residential service voltage is 120 volts, the minimum utilization voltage is 108 volts, the favorable service voltage is 114-126 volts and the “tolerable” service voltage is 110-127 volts.

## Why is 240 volts more efficient?

When it comes down to it, the main advantage of 240-volt power over 120-volt power boils down to one simple point, and it is referred to as Joule’s Law, which is : Power is equal to voltage times current. Twice the voltage will transfer twice the power.

## How many volts is a 3 phase?

The voltage betwee two line is called line voltage . 3 phase system is expressed with line voltages. The line votage is 440 volt. Also the voltage between any one phase and neutral for a 3 phase system is 240 volts.

## How many amps is a 3 phase?

For example, a three phase circuit using 25,000 watts of power and a line voltage of 250 will have a current flow of 25,000/(250 x 1.73), which is equal to 57.80 amperes.

## How many amps is 75 KVA?

Three Phase Transformers, Full Load Amperes (FLC)KVA208V480V7520890112.531213515041618011 more rows

## How do you calculate 3 phase current?

Apply Ohm’s Law Formula Arrange the equation for three-phase power to solve the current (amps): Current (amps) = power (watts) ÷ voltage (volts) ÷ square root of 3 (1.732) ÷ power factor; I = P ÷ (V_1. 732_p. f.).

## Why is 220v called single phase?

In a more general sense, this kind of AC power supply is called single phase because both voltage waveforms are in phase, or in step, with each other. The term “single phase” is a counterpoint to another kind of power system called “polyphase” which we are about to investigate in detail.

## Is 220v and 240v the same thing?

In NA, the terms 220V, 230V, and 240V all refer to the same system voltage level. However, 208V refers to a different system voltage level. … With electrical loads, the voltage will drop, hence the common reference to voltages below 120 and 240, such as 110, 115, 220, and 230.

## What is the color code for 3 phase wiring?

In the United States, colour-coding of three-phase system conductors follows a de facto standard, wherein black, red, and blue are used for three-phase 120/208-volt systems, and brown, orange, and yellow are used in 277/480-volt systems.

## What is the color code for wiring?

US AC power circuit wiring color codes The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active. Three-phase lines are red, black, and blue.

## What are the 3 phase Colours?

For three-phase cables the phase colours are brown, black and grey, instead of red, yellow and blue, respectively, and the neutral colour is now blue instead of black.

## Can 240 volts kill you?

An electric shock from a 240 volt power point can kill you, but on a dry day your car door can zap you with 10,000 volts and just make you swear.

## Can a multimeter kill you?

A multimeter is a device used to measure resistance and voltage in an object. To do this it emits a small amount of voltage itself. If you decide to put one cable into your blood stream on one arm, and the other cable into the other arm, it will result in your immediate death. … Badaboom, you’re dead.

## What are standard voltages?

The voltages are generally in the range 100–240 V (always expressed as root-mean-square voltage). The two commonly used frequencies are 50 Hz and 60 Hz. Single-phase or three-phase power is most commonly used today, although two-phase systems were used early in the 20th century.

## Is 240 volt single phase?

Single Phase 120/240 The voltage between the two legs (called phase to phase or line to line) is 240V and the phase to neutral voltage is 120V. The 120/240 notation identifies the phase to neutral voltage followed by the phase to phase voltage.

## How many kW is an amp?

1000So amps are equal to 1000 times kilowatts divided by volts.

## What color wires go to XYZ?

I normally use Green for ground, White for Neutral, Black for X, Red for Y (and orange for Z on an L21-30). On the Cal Standard plugs and connectors the X is colored Red and Y is colored Black.